
Aluminium pipes
20 – 290 mm OD, powder coated
Aluminium air pipe for factories. Designed, supplied and installed across India.
★★★★★ Certified & trusted across India | 10-year comprehensive warranty included
Trusted by leading manufacturers across India












Share a few details. Our engineer will call you back to understand your plant.
Product range

20 – 290 mm OD, powder coated

20 – 63 mm OD, tool-free

20 – 90 mm OD

113 – 290 mm OD

Isolation & zoning

Point of use distribution

Brackets, supports, hardware

Cutting & assembly
Technical specification












Manufactured in India. Exported to the USA, Australia, Germany and Serbia.
Competitive edge

Push-in fittings (20–63 mm) Zero thread, zero leakage.
Not available.

Integrated elbow & tee design Merged fittings cut parts and assembly time by 40%.

Requires multiple couplers.

Zero thread, zero leakage Patented wall brackets and fittings eliminate leaks.

Threaded, prone to leakage.

Automated valves Ball and butterfly valves with pneumatic or electric actuators, PLC control and SCADA monitoring.
Auto systems not available. Manual or basic valves risk leaks and delays.

Male-female coupler Rubber support and insert nut snap together like puzzle pieces for a leak-proof seal.

Couplers lack this design, harder to install and prone to leaks.
Why Ahuja, why aluminium
Our engineers survey the site, design the network, supply the material, install, test and commission it. No hand-off between supplier and contractor.
10-year warranty on QuickAir modular aluminium piping, with installation workmanship covered by Ahuja Group.
Pipes cut cold and join with fittings. Most work is done while the plant keeps running.
Powder-coated aluminium does not rust like GI or MS pipe, so the air stays clean up to the point of use.
Past projects
Trusted by






















How it works
Aluminium air pipe & fittings
One team designs, supplies, installs, tests and commissions your QuickAir modular aluminium (aluminum) compressed air pipeline across India.
Push-fit fittings 20–63 mm OD (tool-free, zero thread), integrated elbows and tees 20–90 mm, crimped fittings 113–290 mm, ball and butterfly valves, drops & manifolds, brackets and accessories. Transition fittings join existing steel, copper or PPR lines.
20 mm (¾") to 290 mm (12"). 16 bar working pressure with a 40 bar high-pressure option, −20 °C to 90 °C, vacuum down to 1 mbar (absolute). For compressed air (dry, wet, lubricated), vacuum, inert gases and instrument air.
6063-T5 aluminium alloy with blue powder coating. Smooth interior for minimal pressure drop and clean air; resists corrosion, UV and outdoor installation. 25+ years expected life and a 10-year warranty.
Designed, supplied and installed across India, with projects in 11+ states, a team of 33+ engineers and ISO 9001:2015 certification. A 6-step turnkey process from site survey to commissioning and handover.
Before you enquire
Your compressor capacity in CFM or m³/min, approximate factory dimensions, and the number of machines to be connected. A layout drawing makes it faster and more accurate, but is not essential to start.
Yes. Transition fittings connect the aluminium network to existing steel, copper or PPR lines, so a plant can be converted section by section rather than all at once.
No. This is a fixed aluminium pipeline that carries compressed air from the compressor room to every machine in the plant. PU tubes and pneumatic fittings on the machines are a separate product line; for those, see our Festo pneumatic automation range.
Pipe size depends on three things: the air flow your compressors deliver (CFM or m³/min), the working pressure, and the length of the longest run from the compressor to the farthest machine. Send us these three and our engineer sizes every section of the network as part of the quotation.
Our own certified installation team. The same team that produces the design carries out the erection, pressure testing and commissioning, so responsibility does not split between a supplier and a contractor.
Ten years against manufacturing defects on pipe and fittings, valid when the system is installed by authorised technicians. Installation workmanship is covered separately under our own warranty.
In most cases yes. The system requires no welding or hot work, so new lines and drops can usually be installed alongside production, with a short tie-in shutdown only at changeover.
The QuickAir range covers push-fit fittings (20–63 mm OD, tool-free), integrated fittings with a merged elbow and tee design (20–90 mm OD), crimped fittings (113–290 mm OD), ball and butterfly valves for isolation and zoning, drops and manifolds for point-of-use distribution, and brackets, supports, hardware and installation tools.
It mainly depends on pipe size. Push-fit fittings cover 20–63 mm OD and connect tool-free with zero threads. Integrated fittings (20–90 mm OD) merge the elbow and tee, cutting parts and assembly time by 40%. Crimped fittings are used on large pipes from 113 to 290 mm OD. Our engineer selects the right type during system design.
Yes. The system connects to female thread, male thread and flange joints, and drops and manifolds deliver air at each point of use. Transition fittings also tie into existing steel, copper or PPR lines.
Yes. The system is modular and the fittings are reusable, so you can expand, modify or relocate lines as the plant evolves using the same set of materials, from 20 mm to 290 mm (¾" – 12").
Yes. QuickAir systems are designed, supplied and installed across India, with projects in 11+ states. Share your plant details in the form or call +91 90018 48552, and our engineer will respond within one working day.
It is a modular network of powder-coated aluminium pipes and fittings that carries compressed air from the compressor to every machine. Unlike GI or MS pipe it does not rust, the smooth full bore gives minimal pressure drop and contaminant-free air, zero-thread joints are leak-proof, and installation is up to 70% faster with no welding.
Pipes and fittings from 20 mm (¾") to 290 mm (12"), rated for 16 bar working pressure with a 40 bar high-pressure option, vacuum down to 1 mbar (absolute), and temperatures from −20 °C to 90 °C.
The pipes are made from 6063-T5 aluminium alloy with a blue powder coating. The powder-coated finish gives a smooth interior for minimal pressure drop and clean air, and resists corrosion, UV and outdoor installation. The material is non-flammable (UL94HB rated) and 100% recyclable.
Up to 70% faster than steel, copper or welded systems. The pipes are light and easy to cut, and there is no welding, gluing or threading, so most installation work is done while the plant keeps running.
The expected pipeline lifespan is 25+ years, backed by a 10-year warranty against manufacturing defects on pipe and fittings. The system resists corrosion, vibration, heat and harsh environments.
A drawing, a sketch, or just your compressor capacity and factory size. That is enough to start.